Sleeves & Fittings
Ultra-Sleeve Wide Range Joint Repair
One Sleeve Fits All Hubs and Bells, Leaking Joints on IPS, DIP, CIP and PVC Joints, Asbestos Cement Collars. Also encapsulates old couplings, repair clamps and other old leaking repair devices. Nearly all pipe diameters are covered by one sleeve in the 4” to 12” diameters while providing up to 1.3” of range and 4 degrees of dynamic deflection per end. Diameters covered include IPS, DIP, CIP, and AC (asbestos cement diameters including class 200).
The Ultra-Sleeve for Joint Repair and Encapsulation is available in sizes from 2 to 24” diameters.
Abandoned Corporation Fitting
The Abandoned Corporation Fitting is fabricated of Type 304 Stainless Steel, has a fully pressure rated Cap and Extension built to ASME VIII-1 pressure code requirements for a pressure vessel. It should be noted that flat topped caps do not qualify as pressure vessels but are qualified as non-pressure rated storage vessels by ASME.
Nuts, bolts and washers are typed 304 stainless steel and the units is equipped with an NSF 61-372 rated NBR gasket that is compatible with all water chemistry and provides resistance to hydrocarbons in both line content and possible contact when buried in various soil conditions. This product is available with various cap ends to accommodate varying valve diameters and valve lengths, and many of the products in this category are designed to meet specific job requirements normally specified by the design engineer.
